• 신제품
  • 제품소개
    • 레코더
    • 전력계
    • 회로소자 측정기
    • 신호발생기
    • 환경측정기
    • 클램프센서
    • 현장용 테스터기
    • 안전규격 측정기
    • 거리측정기
    • 주변장비/옵션
    • PCB 검사장비-ATE장비
  • 기술자료
    • 카달로그
    • 메뉴얼
    • 소프트웨어
  • 적용사례
    • 레코더
    • 전력계
    • LCR 미터
    • 저저항계
    • 기타
  • 고객센터
    • 공지사항
    • 견적요청
    • A/S 센터
    • 제품 문의
    • 1:1 친절 상담
    • 메뉴얼 상담
    • 정품확인
    • FAQ
    • Contact Us
  • 채용정보
    • 채용공고
  • 회사소개
    • 인사말
    • 회사조직도
    • 회사 위치 및 영업소
    • ISO 9001 정보
  • 레코더
  • 전력계
  • 회로소자 측정기
  • 신호발생기
  • 환경측정기
  • 클램프센서
  • 현장용 테스터기
  • 안전규격 측정기
  • 거리측정기
  • 주변장비/옵션
  • PCB 검사장비-ATE장비




HOME > 제품소개 > 제품정보


LR8400 시리즈
강력한 성능과 휴대성을 동시에...
제품번호 : LR8400 시리즈
제 품 명  : MEMORY HiLOGGER
제품분류 : 레코더
 
  
 
* 본제품은 태신상사 기술영업사원과 상담이 필요합니다.
  제품데모도 가능하오니 문의바랍니다.(문의처는 홈페이지 하단참조)
 
A4 사이즈의 로거, 표준 30ch. 최대 60ch 사용가능(옵션 장착시)
대용량 메모리와 데이타 보호기능으로 장시간의 데이타저장에 안성맞춤
온도,습도,압력등의 환경변화에 의한 피측정물의 저항값 변화 기록가능.
10m sec의 고속샘플링
USB 메모리 사용가능.
 
Analog input UNIVERSAL UNIT LR8501
Actual functionality will depend on combination of units installed

Note: Isolated from each channel to chassis
[No. of channels] 15 analog channels; isolated scanning method input (4 terminals: push-button type)
[Voltage] 10 mV to 100 V, 1-5 V f.s. 10 ranges, Max. resolution: 500 nV
Note: Isolated between channels and from each channel to chassis
[Temperature: Thermocouples] -200°C to 2000°C (depends on sensor), 3 ranges (K, J, E, T, N, R, S, B, W), Max. resolution 0.01°C
Note: Isolated between channels and from each channel to chassis
[Temperature: Pt 100, JPt 100 sensor] -200°C to 800°C, 3 ranges, Max. resolution 0.01°C
Note: Not isolated between channels
[Resistance] 10 Ω to 200 Ω f.s. 4 ranges, Max. resolution 0.5 mΩ
Note: Not isolated between channels
[Humidity] 100 % rh f.s. 5.0 to 95.0 % rh (when using Z2000), resolution 0.1 % rh
Note: Not isolated between channels nor from each channel to chassis
[Max. rated voltage between isolated input channels] 300 V DC
[Max. allowable input] ±100 V DC
[Max. rated voltage from isolated terminals to ground] 300 V AC, DC
Analog input VOLTAGE/TEMP UNIT LR8500
Actual functionality will depend on combination of units installed

Note: Isolated from each channel to chassis
[No. of channels] 15 analog channels; isolated scanning method input (2 terminals: M3 screw type)
[Voltage] 10 mV to 100 V, 1-5 V f.s. 10 ranges, Max. resolution: 500 nV
Note: Isolated between channels and from each channel to chassies
[Temperature: Thermocouples] -200°C to 2000°C (depends on sensor), 3 ranges (K, J, E, T, N, R, S, B, W), Max. resolution 0.01°C
Note: Isolated between channels and from each channel to chassies
[Temperature: Pt 100, JPt 100 sensor] [Resistance] not available
[Humidity] 100 % rh f.s. 5.0 to 95.0 % rh (when using Z2000), resolution 0.1 % rh
Note: Not isolated between channels nor from each channel to chassies
[Max. rated voltage between isolated input channels] 250 V DC
[Max. allowable input] ±100 V DC
[Max. rated voltage from isolated terminals to ground] 300 V AC, DC
Caution: Max. voltage from terminals to ground without damage
Pulse, Digital input [No. of channels] 8 channels, pulse / digital selectable for each channel, M3 screw terminal, not isolated, common ground
[Pulse totalization] 0 to 1000 M pulse, 1 range (No-voltage 'a' contact; normally open, open collector or voltage input), Max. resolution 1 pulse
[Pulse revolutions] 0 to 5000 /n (r/s) f.s. 1 range (same as Pulse totalization input signal condition), resolution 1/n (r/s) Note: "n" is the number of sensor output pulses per revolution, 1 to 1000
[Digital input] Record logical "1" or "0" at each sampling
[Max. rated voltage between input channels] Not isolated
[Max. allowable input] 0 to 50 V
Recording intervals 10 ms to 50 ms, 100 ms to 1 hour, 19 selections (All input channels are scanned at high speed during every recording interval)
Note: limited by using channels at 10 ms to 50 ms interval
Digital filter Select from OFF/ 50 Hz/ 60 Hz (the cut-off frequency is automatically set)
Data storage Internal memory: 8 M-words, Data storage media: CF card or USB memory
(Only data recorded to a genuine HIOKI CF card is guaranteed)
LAN interface 100BASE-TX, Functions: Data acquisition using bundled software or PC commands, FTP server, FTP client, HTTP server function, or E-mail system
Note: LAN communication support planned from software Ver. 1.20
USB interface USB 2.0 High-speed capable, series mini-B receptacle
Functions: Data acquisition using bundled software or PC commands, Transfer data from the CF card to a PC via USB drive mode
Note: Data transfer not possible from USB memory sticks
Display device 5.7 inch TFT color liquid crystal display (640 × 480 pixel)
Other functions Save waveform data in real time to the CF card or USB memory stick, Numerical value calculations, Waveform calculations, and others
AC Power Using the AC ADAPTER 9418-15 (100 to 240 V AC, 50/60 Hz), 7 VA
DC Power Using the BATTERY PACK Z1000 (optional accessory), Continuous use 5 hr, External power: 10 to 28 V DC (Please contact your HIOKI distributor for connection cord)
Dimensions & Mass 272 mm (10.71 in) W × 182.4 mm (7.18 in) H × 66.5 mm (2.62 in) D, 1.8 kg (63.5 oz), (LR8400-20 main unit, excluding the Battery Pack 370 g/ 13.1 oz)
Accessories Detailed operating manual ×1, Measurement guide ×1, AC ADAPTER 9418-15 ×1, USB cable ×1, CD-R (data collection software "Logger Utility") ×1




Measurement and input options

VOLTAGE/TEMP UNIT
LR8500


UNIVERSAL UNIT
LR8501


HUMIDITY SENSOR
Z2000

Power supplies

BATTERY PACK
Z1000


AC ADAPTER
9418-15

Case

CARRYING CASE
C1000


FIXED STAND
Z5000

Removable storage (CF card)

PC CARD 2G
9830


PC CARD 1G
9729


PC CARD 512M
9728


PC CARD 256M
9727

PC communication

LAN CABLE
9642

 


서울특별시 서초구 서초동 1338-21 코리아비즈니스센터 1703호  T. 02-3474-0070  F. 02-3474-0090

COPYRIGHT ⓒ TAISHIN CO.LTD ALL RIGHTS RESERVED.

HIOKI 로고 & ISO9001 인증업체 로고